Should the NBA allow load management

Here you can see a selection of items from this section that may be of interest to you.
2-wire, 5 (80) A, 2xS0, LON, M-Bus, TCP / IP, BACnet, Modbus RTU, 230V Electronic active energy meter EM2281 with MID approval Energy meter for single-phase 2-wire networks, direct measurement up to 80 A. Simultaneous display of Active energy and instantaneous power to assess the current circuit load. Comprehensive recognition and understandable presentation of all ins
- 2-wire, 5 (80) A, S0, 230V alternating current energy meter U181A with MID approval Compact double tariff energy meter for active and reactive energy, 80A direct connection, MID-calibrated, for 4 quadrants, import and export, partial and balance meters and up to to 30 measured values ​​for real-time variables Type: 2-wire Display: LC display mi
5 (65) A, S0, LON, M-Bus, L-Bus, 230V Energy meter U1289 with MID approval Electronic active energy meter for 4-wire three-phase networks Active energy meter for three-phase 4-wire networks, direct measurement up to 65 A. Simultaneous display of active energy and Instantaneous power to assess the current circuit load. Comprehensive expl
5 (6) A and 1 (6) A, S0, 100..110Venergy meter U1387-V011 with MID approval, current transformer connection Electronic active energy meter for 3-wire three-phase networks with MID approval, current transformer connection Active energy meter for three-phase 3-wire networks, transformer connection 5 // 1 A. Simultaneous display of active energy and momentary energy
The powerful software solution Energy Management Control 5.x is specially designed for applications in industry, energy and housing. With it, all relevant consumption data can be automatically recorded, visualized, analyzed and billed. On this well-founded data base
Software, process visualization (SCADA) SMARTCOLLECT is data management software for simple and safe measurement data acquisition and data analysis with a focus on energy management. With SMARTCOLLECT, all relevant consumption data for electricity, water, gas or heat can be recorded, saved, visualized, evaluated and a
Data logger U300C (standard version) / IP 65 / cabinet Electronic self-sufficient summation station for cross-media energy and consumption data acquisition, with load management and fault reporting functions. Electronic self-sufficient summation station for recording energy and consumption data and / o
Data logger U300D (additional 24 I / O module) / IP 20 StBl housing Electronic self-sufficient summation station for cross-media energy and consumption data acquisition, with load management and fault reporting functions. Electronically self-sufficient summation station for recording energy and consumption data and /
Data logger U300E (also LON) / IP 20 StBl housing Electronic self-sufficient summation station for cross-media energy and consumption data acquisition, with load management and fault reporting functions. Electronic self-sufficient summing station for recording energy and consumption data and / or counting
LON data logger U300F (also I / O24 + LON) / IP 20 StBl housing Electronic self-sufficient summation station for cross-media energy and consumption data acquisition, with load management and fault reporting functionalities. Electronic self-sufficient summation station for recording energy and consumption data and / o
TCP data logger U300G (also Modbus TCP) / IP 20 StBl housing Electronic self-sufficient summation station for cross-media energy and consumption data acquisition, with load management and fault reporting functionalities. Electronic self-sufficient summation station for recording energy and consumption data and / or
EnergyControl summator SU1604, consisting of the basic module U1604, power supply module U1614, pulse acquisition module U1624 Modular, expandable summation for energy and consumption data acquisition that can collect meter data via internal computing channels. Modularly expandable with up to 64 galvani
A (primary), 1 A (secondary) cable conversion current transformer SC30 Current transformer SC30 60 A to 250 A according to IEC 61869-2: 2012. For subsequent installation without opening the conductor circuit Type: SC30 Cable opening (diameter): 18 mm Primary current: 60 A to 250 A Secondary current: 1 A Dimensions: 50.4 x 36 x 35.6 (HxWxD) Freque
A (primary), 1/5 A (secondary) cable conversion current transformer SC40-C Current transformer SC40-C 200 A to 500 A according to IEC 61869-2: 2012. For subsequent installation without opening the conductor circuit Type: SC40-C Cable opening (diameter): 28 mm Primary current: 200 A to 500 A Secondary current: 1 A or 5 A depending on the type Dimensions: 67.2
A (primary), 1/5 A (secondary) Cable conversion current transformer SC50-E Current transformer SC50-E 200 A to 1000 A according to IEC 61869-2: 2012. For subsequent installation without opening the conductor circuit Type: SC50-E Cable opening (diameter): 42 mm Primary current: 250 A to 1000 A Secondary current: 1 A or 5 A depending on the type Dimensions: 97
Basic model, connection of up to 10 sensors ENERGYSENS-EScom - U100A - basic module for the connection of up to 10 ENERGYSENS sensors including 5 m ribbon cable and 10 pieces of ribbon cable connector. General information on the ENERGYSENS SYSTEM Intelligent sensor system for energy, current, voltage and frequency. POWER MEASUREMENT SIMPLE
MAVOWATT 230, 240, 270 With the MAVOWATT 230, 240, 270 product series from GOSSEN METRAWATT, a new generation of high-quality power quality, power and energy measuring devices is available for measurements in the range of 1000 V CAT III, 600 V CAT IV. The new MAVOWATT power disturbance analyzers combine proven technology
MAVOSYS 10Modular system for monitoring power quality, power and energy MAVOSYS 10 opens up completely new possibilities for monitoring power quality, power and energy: It is the first power analyzer with more than 8 channels, can be configured in a modular way and thus offers for every requirement
PRO according to IEC 61000-4-30 MAVOLOG PRO power disturbance analyzer class A according to IEC 61000-4-30 The power disturbance analyzer MAVOLOG PRO was designed for permanent network monitoring with regard to the power quality standard EN 50160. The high flexibility of the parameterization allows an adaptation to other standards as well as the use for all
3 measuring sensors, 30A, 300A, 3000AMETRAFLEX 3003XBL Flexible AC current sensors for energy and power failure analyzers Technical characteristics Three adjustable measuring ranges 30A, 300A, 3000A. Setting via robust rotary switch Measuring ranges | 30 A | 300 A | 3000 A scaling factor | 20 | 200 | 2000 output sensitivity | 50
Current clamp sensors Use for power measurement with network analyzers - due to the low phase angle error Connection: Hypertronic plug for network analyzers Output: Voltage The current clamp sensors listed below cover the measuring range from 0.1 A AC to 3000 A AC. You can di
Graphic Data Manager with 5.7 "TFT color graphic display for displaying, monitoring, analyzing and saving of multifunctional inputs with the following features: TFT color graphic display with 145mm screen diagonal for best readability Very simple operation via push-wheel storage
© 2021 ORCA Software GmbH • Statistics • Legal information • Data protection • Imprint & contact

Manufacturer information

Gossen Metrawatt GmbH
Südwestpark 15 D-90449 Nuremberg

Tel +49 (0) 911 8602-0
Fax +49 (0) 911 8602-669
Area Electrical engineering

GOSSEN METRAWATT and CAMILLE BAUER stand for more than 25 years of experience in the field of energy management - that makes us a reliable partner. With our energy meters, universal measuring devices, network analyzers and the appropriate software, we specialize in individual solutions and the optimization of your energy management.

was standing 02.10.2020   Texts 105   images 148   Attachments / documents 288