Flashing The router is trying to connect to your ISP. USB cable connects to the PC. Don’t show me this message again. RJ cable connects to an Ethernet device such as a PC or a switch. This manual also for: Click Browse to locate the file.
|Date Added:||22 June 2016|
|File Size:||16.88 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
WL-AM | Networking | ASUS
The default username is admin, and password is admin lowercase. Select the application that you want to configure the port settings for. Click Mdoem to add to the Access Control List the IP addresses of the management stations allowed to access those local management services.
Select the WAN interface that you will be using.
Select a service name from the dropdown list and enter the server IP address. For the rest of the checkboxes and field, keep the default settings. The technique operates as if separate modems were running in parallel.
Click Add to add a virtual server in your LAN.
A successful connection is established between the Solid router and PC through an Ethernet cable. If RIP is enabled, the router operation can be configured as active or passive.
Enter the hostname and the interface that you are using. Save the file to your PC. Plug the AC power cord into a power outlet.
Click Update Software to update your software. If you select Both, events will be sent to the specified IP address and Am02 port of a remote system log server, and saved in the local memory.
ADSL 2/2+ Ethernet / USB Combo Router
Select the Enable NAT checkbox. The router reboots to activate the new settings. To set up a virtual server: Connect the AC power cord to the AC adapter. The tone range is from 0 to 31 for upstream and from 32 to for downstream.
Assign a priority level low, medium, and high to this traffic class. Deselect the Enable Automatic Assigned Default Gateway checkbox If you do not want to use the automatically assigned default gateway. Table of Contents Add to my manuals Add. Check if the settings are correct.
Here is an example of PPPoE connection type. Enter text from picture: Click Local Area Connection. Click Add to add a new connection for the WAN interface. The USB driver installation is completed.
This manual also for: Disable the bridge service if desired.
AM | Networking | ASUS Singapore
A Files Needed window appears, asking you to specify the location of the file needed. Click OK when a window appears querying Are you sure you want to restore factory default mdem. Restore Default Click Restore Default Settings to delete all current settings and restore the router to its factory default settings. The system logs all the events above or equal to the selected log level, and displays only the logged events above or equal to the selected display level.