These drivers are originally taken from the Linux 2. Margin yields the minimum distance between the measured cable pair and the maximum IEEE To restore a saved configuration, perform the following: Broadcom Advanced Server Program for Linux is shipped in mixed forms; the platform and kernel-specific files are in source code, and the core file is in object form. The benefit of this approach is load balancing and redundancy, see “Teaming Overview”. This test verifies if the NDIS driver is installed correctly and test connectivity to a gateway or other specified IP address on the same subnet.

Uploader: Tausar
Date Added: 18 September 2006
File Size: 32.59 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 40396
Price: Free* [*Free Regsitration Required]

If an IP address unique to the subnet is not assigned, the adapter will not be used when LiveLink is enabled. To create a new team perform the following steps: Comments Error posting comment.

This minimizes the downtime due to spanning tree loop determination when failing over. This value can never be zero. This parameter indicates the interrupt line number that is associated with the selected adapter. The format should be ww.

Before you start the team, it is recommended that you use the ifconfig command to temporarily bring up one of the member interfaces using the IP address that you specified for that member in step 4. What do people think about it?

  GIGABYTE GA945GZM S2 LAN DRIVER

BACS2 also enables you to perform detailed tests, diagnostics, broadcon analyses on each adapter, as well as to view and modify property values and view traffic statistics for davanced adapter. No one has commented yet. Change the advanecd type. The Length sub tab allows you to verify cable length, which is calculated by a Return Loss algorithm, and determine whether your configuration has the appropriate cable. The test writes patterned values to the memory and reads back the results.

Usually one default gateway is specified for the system, and it should be reachable from one network interface. Load the network drivers for the adapters that are to be on the team. The two graphs represent the values calculated by served Cable Loss and Return Loss algorithms.

Broadcom Advanced Server Program for Linux is shipped in mixed forms; the platform and kernel-specific files are in source code, and the core file is in object form.

Removing the first physical interface from the team using baspcfg and binding it directly to the protocol could lead to having a duplicate MAC address problem on the network.

When configuring teaming, you must designate at least one adapter as a primary team member. If the return loss red curve is above the return limit blue curve, the cable is outside the operating limit of the IEEE bgoadcom Change to the directory where the BASP source files are located: The Broadcom Management Programs Setup screen appears.

  ATAPI IHAS124 W DRIVER

Broadcom Advanced Control Suite

The cable loss red curve represents the insertion loss of the cable under test as a function of frequency in the frequency range [0 – The Diagnostics screen allows you to view information only for Broadcom adapters.

Margin yields the minimum distance between the measured cable pair and the maximum IEEE You must delete the sign at the beginning of each respective line item.

Four packages are shipped in this release: During the installation process, the following message may be displayed:. A Windows dialog box will appear.

Broadcom Advanced Control Suite: Broadcom Gigabit Ethernet Adapter User’s Guide

A probe target must be on the same subnet as the team, have a valid not a broadcast, multicast, or unicaststatically-assigned IP address, and be highly available orogram on.

If a gateway is configured, it will automatically send to that system. This condition would signify that the cable length is too long and not operational.

LiveLink mitigates such issues.

MIB file, which is on your installation CD.