The last digit ‘1’ shows that the license is active. Increasing the value makes the margin at the trailing edge larger. Mode for preventing the end temperature rise 0 0 to 5 This accessory comes standard with the models for Asia and the models for some Latin American countries. Initializes the counter numerator in the system dump list. There is no firmware for the OS version you selected. Display detailed error information from error in case there is an error response from UGW.

Uploader: Moogugami
Date Added: 23 January 2015
File Size: 50.40 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 38047
Price: Free* [*Free Regsitration Required]

If the user uses paper that causes fixed toner on paper to be fused and adhered to drum, selecting “Yes” scnaner clean the drum by forming a black band on the drum surface during the reverse rotation which is caonn after printing on 50 sheets.

Dispose of used Batteries according to the instructions. Actual prices are determined by individual dealers and may vary. When the main motor starts rotating, the interlocked relay gear also starts rotating.

Club Copying: Canon iR Black and White Photocopiers for London Business – Copiers and Printers

When the hexahedral mirror rotates at scanmer constant speed, the photoconductor drum is scanned with laser beams at a constant speed. However, in case the character number exceedscharacter strings after th are omitted. Do not change the settings. When ‘0’ is selected, count type will zcanner be indicated. Adjustment of the registration loop volume. Press numeric keypad keys i2022, 3 and 4 during the CCD test to carry out the individual tests described below. OFF time short setting HP sensor escape direction, but the offset HP – Check the connector of the offset motor.


Controls drive of the carriage. When ‘do not enable’ is selected using bit 7, the time-out length for a single page for all modes will depend on the setting of bit 0 and bit 1. Any of the following canob codes may be indicated at time of transmission,,,,, If automatic adjustment fails, “NG” appears.

The toner bottle is charged with 1-component, insulating, magnetic toner. Find Supplies and Accessories About Counterfeits. If transparencies are used, be sure that they are placed in the manual feed tray in canpn correct orientation.

Chapter 15 Press ‘1’or ‘2’ on the keypad on the Modem test menu to select relay test mode. It tends to react easily.

I222 your browser’s documentation for specific instructions. E Fixing film sensor failure The fixing film sensor is faulty. This operation is called ‘ Inactivity of the transmitted license’. Indications do not change back from 1 to 0 once the sensors turn on from the off state. Target fixing temperature at startup.


JAM Use it to clear the contents of the jam history. In case of a communication error, you can find its cause by referring to the communication error log.

Canon iR 2022

Only if equipped with ADF functions. Check if PING by host name passes from computer to the device.

The descriptions in this Service Manual are subject to change without notice for cnaon improvement or other purposes, and major changes will be communicated in the form of Service Information bulletins.

Feeder Cleaning Press [Start].

TP1 Thermo switch Cuts off the heater power supply line when an abnormal temperature is detected. Document size sensor SR or SR It measures the density of the standard white plate, and compares the measured value with the target value stored in the shading correction circuit to use the difference between the two as the shading correction value.